Our news

«To work with CTE Wind as designer was nice. The speed of response and reliability of the planning has been a winning experience for us.»

Arjan Louwerse from H4a Windenergie B.V.

Coöperatie Zuidenwind has poured the concrete for the foundation in Heibloem in the Netherlands and created the basis for the installation of their wind turbines. The foundation design and calculation for this project was done by CTE Wind Civil Engineering. The expert in foundation design WTG suggested their Soft-Spot® instead of a typical pile foundation.

Heibloem (NL) / La Richardais (FR) – The Netherlands soil consistsof unconsolidated, very young sediments. Due to the proximity of the low-lying part of the European continent, the basin of the North Sea, the bottom rarely rises higher than 30 m above sea level. In the areas along the coast (provinces of Groningen, Friesland, Noord-Holland, Zuid-Holland, Zeeland) the surface soil layers consist mainly of clay deposits. In the west of the Netherlands the clays are replaced by lowland moors (peat). To sum up: in the Netherlands, pile foundations are mandatory for wind turbines because of the concentrated forces occurring on little surface area. Except in Heibloem, where the ground is exceptionally stable. So good, in fact, that CTE Wind offered its resource-saving Soft-Spot® instead of the usual foundation.

Soft-Spot® in the Netherlands

The Soft-Spot® was developed by CTE Wind’s engineering team and is implemented in various countries around the world. «It was simply the most economical foundation we could choose », Arjan Louwerse from H4a Windenergie B.V. says. He is the project manager for Coöperatie Zuidenwind wind turbines. This foundation design optimizes the use of resources and helps to save up to 15 % of concrete and 2 to 5 % of reinforcement steel. In some cases what is even more important than the costs is the available space : with Soft-Spot® you need less surface for the foundation. This reduces the time and excavation costs. «The philosophy to reduce the costs of the Soft-Spot® was also a good point of discussion with our client. From the beginning we had a good feeling with the design», he explains.

In fact thanks to the new design the outer diameter of the foundation was 1.1m smaller compared to a typical foundation design. This resulted in a reduction of 11 % of concrete and 3 % of steel – or more precisely about 100m3 of reinforced concrete. «To work with CTE Wind as designer was nice. The speed of response and reliability of the planning has been a winning experience for us», Louwerse added. In spring 2020 the wind turbine will arrive together with the largest blades ever installed onshore in the Netherlands. (ctewind)

We are pleased to announce our participation at RAWI FORUM 2020, taking place from February 19th to 20th in Moscow, Russia. Over 300+ participants are expected.

BUILDING A NEW INDUSTRY TOGETHER

CTP Director and Senior Engineer Dariusz KRASOWSKI and CTE Wind International Business Developer Sergio CARÈ-LUCAS will attend the most important Russian forum to discuss about key trends of wind energy market in Russia.
This is a great opportunity for interested companies and experts to meet our dedicated sales team to learn more about CTE Wind’s civil engineering and foundation expertise and to talk about future business opportunities.

ARRANGE A MEETING NOW

Please do not hesitate to write us to arrange a meeting.
We are looking forward to meeting you in Moscow.
Please contact us here

LINK TO CONTACT

The SOFT-SPOT® was developed by CTE Wind’s engineering team and is implemented in various countries around the world. This foundation design optimizes the use of resources and helps to save concrete, reinforcement bars and less surface for the foundation. This reduces the time and costs.

La Richardais (FRA) – CTE Wind has already developed and implemented some projects since the launch of the SOFT-SPOT®. Several hundreds of the new foundation design are built around the world : Brazil, France, Lithuania, Indonesia, Mexico, Netherland, Russia, Serbia, Sweden and Thailand to name a few. As a result of his astonishing design the projects allow savings in concrete volume up to 15%, reduction of foundation diameter and total weight of reinforcement bars of 2-5%. In some cases what is even more important than the material costs is the available space : with SOFT-SPOT® you need less surface for the foundation. This reduces the time and excavation costs.

Layer of soft material

CTE WIND Civil Engineering presents to the market a new foundation system for wind turbines, a WTG shallow gravity foundation with SOFT-SPOT®. Through placing a layer of soft material below the central part of the foundation, the slab will effectively act as a ring foundation with respect to the soil-structure interaction. The bearing pressure of the WTG is concentrated at the annular contact surface closer to the edge of the slab. This increases the lever arm of the stabilizing moment. Therefore, the foundation diameter can be reduced in comparison to a standard foundation solution.

Simply the most economical foundation

Thanks to SOFT-SPOT® intelligent design less excavation work is needed. This reduces the machine costs. A major point is that no additional training of site workers is required for the construction of the soft layer. The construction is very easy and the material for the soft layer can be purchased cheaply all over the world. Or as one of CTE Wind’s client pointed out: It is simply the most economical foundation you can choose. (ctewind)

Please contact us if you are interested in knowing more about CTE Wind’s SOFT-SPOT®