Our news

CTE Wind Ibérica, experts in wind turbine foundation design, in Spain and Latin America, celebrates this year the 5^th anniversary of the company.

CTE Wind Ibérica’s journey began back in June 2017 in Bilbao (Basque Country) and focused its design and calculation work for the Spanish market and Spain based customers operating worldwide. Since then, many customers entrusted the Spanish experts in WTG foundation design with over 225 contracts. Foundations for 4900 WTGs (or close to 20 GW energy output) have been designed, value-engineered or peer-reviewed in 181 wind farms across 22 different countries.

«CTE Wind Ibérica has experienced phenomenal growth in its few years of existence», said Alexander MARTIN, CEO of CTE Wind International. «In the advancement of this growth, we will continue to bring cost-effective foundation design, geotechnical consulting services and exceptional customer service to EPC, CBoP, Developers and OEMs.»

All major turbine manufacturers

In five years of market presence, CTE Wind Ibérica has designed foundation for ten different OEMs: Enercon, Envision, GE, Goldwind, Nordex, NRG Patagonia, Senvion, Siemens-Gamesa, Vestas and WEG. Regardless if the wind turbine had a tubular steel or concrete tower. Noteworthy are the rock anchored foundation design in Mexico or the star foundation (ribbed foundation) in the Gecama wind park project in Spain (see picture).

CTE Wind Ibérica also implemented successfully CTE Wind’s patented Soft-Spot® solution, with most of the above-mentioned manufacturers. Particularly in Spain and Latin America is the low resource foundation a big success.

Active in Wind since 2003

CTE Wind Ibérica, as part of CTE Wind International, is an international engineering consulting firm specialized in the analysis and design of onshore wind turbine foundations. CTE Wind has been active in the wind energy sector since 2003. As of 2022, CTE Wind International has designed, value-engineered or peer-reviewed foundations for over 23,500 turbines in 74 countries. CTE Wind is headquartered in France and has offices in Brazil, Poland, Portugal, Spain, USA and Asia.

The company is a subsidiary of the CTE Group, a consulting firm, specialized in building and civil engineering. The CTE Group was founded in 1965 and today is one of the leaders in the structural engineering sector in France.

We are pleased to announce our participation at RAWI FORUM 2020, taking place from February 19th to 20th in Moscow, Russia. Over 300+ participants are expected.

BUILDING A NEW INDUSTRY TOGETHER

CTP Director and Senior Engineer Dariusz KRASOWSKI and CTE Wind International Business Developer Sergio CARÈ-LUCAS will attend the most important Russian forum to discuss about key trends of wind energy market in Russia.
This is a great opportunity for interested companies and experts to meet our dedicated sales team to learn more about CTE Wind’s civil engineering and foundation expertise and to talk about future business opportunities.

ARRANGE A MEETING NOW

Please do not hesitate to write us to arrange a meeting.
We are looking forward to meeting you in Moscow.
Please contact us here

LINK TO CONTACT

CTE Wind’s engineering team is working on different wind projects in Ethiopia, Egypt, South Africa and Saudi-Arabia. And not for the first time ! The WTG foundation experts can look back on 15 years of project history in these regions.

La Richardais FRA – Wind projects all over Africa and Middle East are ramping up. The Global Wind Energy Council foresees wind energy capacity reaching over 3GW by the end of 2023 in South Africa, but according to the IEA, Sub-Saharan Africa alone offers a wind energy potential of 1,300 GW.

Foundation Expertise

As a matter of fact, CTE Wind has been requested to support different European and Arabian customers for their wind projects in Africa and the Middle East. Projects in South-Africa, Ethiopia, Egypt and Saudi-Arabia are currently in CTE Wind’s pipeline. The engineering office provided many times its wind turbine foundation expertise over the last 15 years in North and South Africa. As of 2021, CTE Wind designed, value-engineered or peer-reviewed foundations of 2700 wind turbines within 76 projects. The services vary from geotechnical consulting, to preliminary and detailed foundation design, as well as forensic engineering for existing wind farms, without forgetting the third-party verification (CAT3) task.

First African Project

CTE Wind has worked regularly in Morocco but also in other countries of Africa and the Middle East.

In 2008 CTE Wind had its first wind project for a project in North-Africa. The expert in foundation design for wind turbine foundations designed gravity bases for 131 Siemens machines in the Tarfaya wind park, located in Southern Morocco. Then came the Ashegoda wind farm in Ethiopia, the Kabertene wind park project in Algeria, the Balikesir wind farm in Turkey and the Nojoli wind park in South Africa

Bigger Wind Parks

In 2016 CTE Wind has been awarded the wind park in Ras Ghareb, Egypt, with 125 wind turbines.

The Ombepo wind farm in Namibia came later. In Saudi Arabia, the trouble shooting work was done successfully for the Dumat Al Jandal wind park with 99 positions. A new project in the country has just been awarded to CTE Wind.

This short list gives a quick overview as to where CTE Wind’s expertise in wind turbine foundation in Africa and the Middle East has been requested.

CTE wind is more confident than ever to work on any wind projects from South-Africa to the Middle East region. Get in touch if you need further information about foundation expertise and services.

***

About CTE Wind

About CTE Wind – Experts in Foundation Design World Wide:We serve since 2003 the wind industry as civil / structural engineers for wind park owner, developers and EPC/BoP-contractors. Often also directly for the OEMs. 25000 wind turbines in 73 countries. We provide geotechnical services, preliminary and final designs for wind turbine foundations, repowering and life time extension services.

In the last 2 years over 50 project developers trusted CTE Wind’s Soft-spot^® solution. Recently in Spain the expert of wind turbine foundations has won their third project, where the Soft-spot^® solution was implemented.

Bilbao (Esp) / La Richardais (FRA) – CTE Wind Ibérica has won again a contract in Spain to calculate and design foundations with its Soft-spot^® solution. This is an important milestone for CTE Wind International as now three wind farms on the Iberian Peninsula will take advantage of its cost saving design. In addition to these projects, CTE Wind’s clients are also adopting this solution in many other wind farms worldwide. Argentina, Brazil, Chile, France, Lithuania, Indonesia, Mexico, the Netherlands, Russia, Serbia, Sweden and Thailand to name a few. Over 50 wind farms around the globe, 750 wind turbines are using this resource saving solution which was introduced a while ago by CTE Wind.

« CTE Wind is proud of the confidence shown by its clients, and especially of the interest on applying the Soft-spot^® solution», Chief executive Alexander MARTIN said and added « Our design provides interesting advantages and cost saving in material consumption and civil works while being easy to be built. »

Simply the most economical foundation

The Soft-spot^® was developed by CTE Wind’s engineering team and is implemented in various countries around the world. As a result of his astonishing design this solution allows savings in concrete volume up to 15%, reduction of foundation diameter and total weight reduction of reinforcement bars of 7 to 9%. The earthwork to be handled is reduced too. In some cases, what is also important is the available space : with Soft-spot^® you need less surface for the foundation. The construction is very easy and the material for the soft layer can be easily purchased for a low price all over the world.

.

.

Two simply but effective foundation solutions are the rock anchor, designed for a wind park in Mexico and the high plinth solution for a wind farm in Chile. They are highly cost efficient, feasible and have proven to be very reliable in many projects.

Bilbao (ESP) – Special requests often demand tailormade solutions. But tailormade needs an high specialization and a lot of knowhow from the engineers in the specific field. In foundation design for wind turbine generator (WTG), this specific knowledge is not that common, except for CTE Wind International. Their senior engineers are often asked to find new design solutions. For this purpose, they resort to tried and tested instead of reinventing the wheel. Two simply but effective solutions are the rock anchor and the high plinth solution. They aren’t NEW solutions but are highly cost efficient, feasible and their reliability has been proved in many projects. This article features two project cases, among many others, where CTE Wind International designed a rock anchor for a wind park in Mexico and a high plinth foundation for a wind farm in Chile.

Cost savings thanks to rock anchor

In Mexico CTE Wind Ibérica was selected as WTG foundation designer by a Spanish EPC company. The project has more than 20 WTGs with concrete towers. The project analysis conducted by the Spanish expert in foundation design has led to the recommendation to deploy two different solutions in order to optimize the costs of project. In fact, the soil conditions showed that over a third of the wind turbines were planned on rocky ground. Rather than equipping all wind turbine with standard slab foundations, CTE Wind’s engineering team decided together with the customer to implement rock anchors. This solution uses the rock masses as a WTG foundation. In that way the construction company is able take advantage of the earth crust instead of building a slab foundation. The costs for the reinforced concrete and the construction work can be saved. But this solution is specially challenging as the engineers have to adapt the foundation, with an interface, between the concrete towers and the rock anchors. Not to forget the special design work of these anchors that needs to be done. Finally, the client was impressed and satisfied about the result. But more important: the project costs were below the initial budget.

High plinth for extra height

In another case, CTE Wind was approached by a global construction company and explained the challenge for its project in Chile, with over 35 WTGs. The customer needed an hub height of 4 meters more to increase the energy production and ensure the yield and so its income. They weren’t totally satisfied with a complex solution by one of CTE Wind’s competitors. That is why the construction company asked CTE Wind to find a simple, reliable, feasible and cost-effective solution. That is how the high plinth foundation was chosen: a solution already tested and implemented in multiple projects in Europe. The idea of this foundation is to reach higher hub height with a high pedestal. The tower stands 3 to 6 meters above the «ground level», keeping the gravity foundation independent from the tower system. Ideally the solution provides a longer anchor cage. CTE Wind’s engineering team designed the anchor cage for this project and determined the bolt length and steel quality. If needed CTE Wind can also prepare the detailed anchor cage drawing. After comparing the results of CTE Wind’s predesigns to the competitor’s solutions, the customer decided to go ahead with CTE Wind’s high plinth foundation. No difficulties in regards the construction have been reported. On the contrary, the Spanish expert of WTG foundation design was congratulated.