Our Projects (Overview)

• 

  Tonstad - Norway

• 

  Rock anchor - Verification / Cat. III-Check

• 

  Vestas V136-3.45MW

• 

  52

• 

  179.4

• 

  2017

For the wind park Tonstad in Norway CTE Wind International did the verification work (Cat. III-Check) for 52 wind turbines. One of them with an rock anchor . This foundation solution use the rocky subsoil to anchor the wind turbine foundation to the ground.

If you want to know more about the rock anchor foundation go to our «Solutions» section

• 

  East Vietnam Sea - Vietnam

• 

  2019

• 

  Nearshore foundations

• 

  na

• 

  1

• 

  4MW

New nearshore foundation design allows up to 30 percent cost savings in East Vietnam Sea. CTE Wind has designed a foundation with 520m3 of concrete, 120 tons of steel and 46 piles.

CTE Wind Vietnam (CTV) is part of CTE Wind International with HQ in France.

Read the entire article here LINK

• 

  Peninsula Yucatan - Mexico

• 

  WTG Foundation Detail design

• 

  ENVISION N 25_SM110-2.5MW 120meters hub heights

• 

  36

• 

  90MW

• 

  2018

CTEE Ibérica a réalisé le design détaillé des fondations de 36 turbines pour le parc éolien de Peninsula au Yucatan au Mexique.

CTEE Ibérica fait partie de CTE Wind International dont le siège se trouve en France.

• 

  France

• 

  Foundation & anchor cage design

• 

  Gamesa

• 

  4

• 

  8MW

• 

  2017

“Innovative solution – Increasing the tower’s Hub Height!
The particularity is the length proposed for the anchor cage bolts (8.20m) which allows the elevation of the tower (the plinth’s height = 5.5m).”

• 

  Irlande

• 

  2018

• 

  Design Review (category III check)

• 

  GE

• 

  9

• 

  22,5MW

This wind farm will be capable of providing sufficient renewable energy to power in excess of 15,700 households annually